10-05-2018, 02:21 PM
Steve’s repop.
Azusa front wheels
|
10-05-2018, 05:00 PM
Nice piece. Steve's a craftsman. TJ
10-07-2018, 11:06 AM
Thanks Ted!
Steve basically sent me a kit. All the tubing was bent but not welded together. After that I built it how I wanted it. I wanted to keep it true to the original karts but with a modern twist. Brad
10-07-2018, 01:10 PM
Brad, you should be proud of it! TJ
10-07-2018, 06:55 PM
I’ll be happy when I get it down the track. Hard to get time to work on it. Hope you have been well Ted!
Brad
10-07-2018, 07:02 PM
(This post was last modified: 10-07-2018, 07:07 PM by ted johnson.)
Reasonably well, Brad. Getting the 610 and the new Cubel/Johnson oil clutch housing ready to bolt up to my Dyna Drive gearbox. I designed it along with Ron, Ron did the machine work and it's going together very nicely. I'll bet there aren't many West Bends on Dynas with oil clutch housings! Pro/E is a wonderful thing. We will give 'er a try at Tucson early November, along with Tom Kelley's new Bender manifold. The Photon's ready to go with the Bill Rowan alky HL368 and his top carb adapter for the V-12, Ted
|
« Next Oldest | Next Newest »
|