06-08-2017, 10:46 AM
I don't get it. The last three Azusa axles I bought have been very straight. I replaced the Azusa in the n1ke with a Jack Canady aluminum axle to save the weight when lifting the kart, but the Azusa is still in the shop in case I need it. The Swoopster has an Azusa in it, and it is just fine. Before I installed it, we rolled it on the flat table in the Albuquerque machine shop I used. It was within .010 TIR. This is about the same as the modern axles I used to use in the sidewinders. I don't get it. TJ