|
Axles
|
06-08-2017, 09:27 PM
I wrote an article and had it on the other forum on straightening axles and showed the jig for checking. Put the straightest side on the sprocket side and the worse on the opposite. Heck the tire is probably out of round that far. I use a press for getting them trued up. Takes some time. best method is to know where your keys need to be and to only cut right where they need to be.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Axles - by tom dandes - 06-08-2017, 07:45 AM
RE: Axles - by ted johnson - 06-08-2017, 10:46 AM
RE: Axles - by tom dandes - 06-08-2017, 12:31 PM
RE: Axles - by Randy Dacus - 06-08-2017, 12:58 PM
RE: Axles - by tom dandes - 06-08-2017, 01:39 PM
RE: Axles - by ted johnson - 06-08-2017, 02:07 PM
RE: Axles - by ted johnson - 06-08-2017, 03:40 PM
RE: Axles - by Randy Dacus - 06-08-2017, 08:20 PM
RE: Axles - by steve welte - 06-08-2017, 09:27 PM
RE: Axles - by Terry Bentley - 06-09-2017, 03:08 AM
RE: Axles - by Brett Mallory - 06-09-2017, 05:10 AM
RE: Axles - by tom dandes - 06-09-2017, 10:20 AM
RE: Axles - by Alan E. Lidke - 06-10-2017, 08:19 AM
RE: Axles - by Randy Dacus - 06-10-2017, 08:39 PM
RE: Axles - by tom dandes - 06-11-2017, 08:50 AM
RE: Axles - by ken northside - 06-11-2017, 01:46 AM
RE: Axles - by Randy Dacus - 06-12-2017, 01:26 AM
RE: Axles - by tom dandes - 06-12-2017, 08:51 AM
|
