08-28-2018, 10:32 AM
Beautiful as always my friend. You never cease to amaze me.
Burnishing pictures
|
08-28-2018, 10:32 AM
Beautiful as always my friend. You never cease to amaze me.
10-11-2018, 05:06 PM
I've been very busy doing jobs for the oldminibike guys. Wheels--by far-- are what I do the most. It's good to get a break and do some kart parts. Here is a quick one from Karl.
11-23-2018, 07:18 PM
(This post was last modified: 11-23-2018, 07:30 PM by sam bennett.)
I got my hand on a heavily modified K88 and a pretty stock looking K35 today. I've never had a Komet rat motor and was happy to accept the challenge. I've been doing a lot of mini-bike parts and I was happy to get my hands on some K35 parts.
Here are some pics of the rat.. ] I've done a half dozen mid-70s Komets and they have a different look compared to other engines. Here is a K78 TT with some nice porting which I can't show.
11-23-2018, 07:34 PM
(This post was last modified: 11-23-2018, 07:35 PM by sam bennett.)
I'm going to be selling my restored sidewinders. I'll post on the site this week.
12-06-2018, 08:03 PM
I got some more engines from FVK. Not everyone wants the "over-burnished" look and I can limit the time in the tank to accommodate. I cut the time in half and they still look incredible. Here we have a LH/RH K88 pair. The turn around time was under 24 hours.
12-09-2018, 02:51 PM
Here are some PP flywheels for Bobby M. They are mostly RH drive, but a few LH. Thanks Bobby.
12-12-2018, 05:53 PM
(This post was last modified: 12-12-2018, 06:01 PM by sam bennett.)
Ted sent a 91B1 coupled to a gearbox for some burnishing. I went ahead and replaced the bearings while I was in there.
Here are some GB pics first. Here is the 91B1. From here is goes to some good hands for a hone/fit and assembly. Thanks Ted!
12-12-2018, 06:09 PM
Tom B. sent an order of Rupp and Margay parts. They were already blasted, so here are just the finished photos. Thanks Tom!
01-06-2019, 07:36 PM
Thanks for cleaning up the spam on this thread. I've been doing so many minibike parts I've hardly had any time to do anything else.
I did want to post this WB580 because it's the first one I've had in my hands. It came with a Pamini Piston. After. It took an hour to burnish and another 20 minutes to remove the pins. It's perfect. |
« Next Oldest | Next Newest »
|