08-12-2017, 05:38 PM
(This post was last modified: 08-12-2017, 05:46 PM by sam bennett.)
Here are some parts for some of Scott's customers. Almost every hole in the HL carbs is subject to swallowing a pin, so I wire them up to prevent it. They arrived at 10:30 this morning and were ready to be shipped several hours later.
![[Image: 36132747560_15e1945e13_c.jpg]](https://farm5.staticflickr.com/4384/36132747560_15e1945e13_c.jpg)
![[Image: 36482796586_25b9a81ce6_c.jpg]](https://farm5.staticflickr.com/4432/36482796586_25b9a81ce6_c.jpg)
![[Image: 36132744190_8da520741d_c.jpg]](https://farm5.staticflickr.com/4371/36132744190_8da520741d_c.jpg)
![[Image: 35694296184_464f8236e7_c.jpg]](https://farm5.staticflickr.com/4360/35694296184_464f8236e7_c.jpg)
![[Image: 36529131585_5c46e41aff_c.jpg]](https://farm5.staticflickr.com/4388/36529131585_5c46e41aff_c.jpg)
![[Image: 36391638231_97c9e7e3aa_c.jpg]](https://farm5.staticflickr.com/4366/36391638231_97c9e7e3aa_c.jpg)
![[Image: 36529128485_732939b07d_c.jpg]](https://farm5.staticflickr.com/4381/36529128485_732939b07d_c.jpg)
Jon C in Indiana sent some minibike wheels which were blasted with either sand or aluminum oxide grit. It's pretty heavy stuff, but nothing some time burnishing can't fix. They took longer than normal, but they still turned out great.
![[Image: 36424420406_8cc2aeb833_c.jpg]](https://farm5.staticflickr.com/4399/36424420406_8cc2aeb833_c.jpg)
![[Image: 36332934611_838210782d_c.jpg]](https://farm5.staticflickr.com/4420/36332934611_838210782d_c.jpg)
![[Image: 36073228910_aed2e52867_c.jpg]](https://farm5.staticflickr.com/4367/36073228910_aed2e52867_c.jpg)
Jon C in Indiana sent some minibike wheels which were blasted with either sand or aluminum oxide grit. It's pretty heavy stuff, but nothing some time burnishing can't fix. They took longer than normal, but they still turned out great.