05-18-2020, 10:10 AM
Steve you just explained why there is wear on the right front spindle and the left was fine the left has no up or down
movement and the right one had to be sleeved buy the way i used a steel sleeve pressed in with a very large C clamp
now assembly of the right renewed side i have to put a shim/washer .004 to stop up and down movement between
the hanger and the collar
movement and the right one had to be sleeved buy the way i used a steel sleeve pressed in with a very large C clamp
now assembly of the right renewed side i have to put a shim/washer .004 to stop up and down movement between
the hanger and the collar
Richard Stamile
Oceanside NY.
Oceanside NY.