05-17-2020, 11:49 AM
Doug i believe you can use that on steel i think its designed for brass is
it does not grab the brass metal like when you go to drill with a standard metal drill bit
and it grabs the part of your drill and jams and either your part dangerously starts spinning around
or stalls the drill press, in the shop i used to work in we had special brass drill bits you can tell by
the elongated flutes and you could drill a brass part without panic setting in waiting for the grab an jam and part spinning
before we got them i used to ware the thick welding gloves other non ferrous metals didn't seem to be as bad as brass
it does not grab the brass metal like when you go to drill with a standard metal drill bit
and it grabs the part of your drill and jams and either your part dangerously starts spinning around
or stalls the drill press, in the shop i used to work in we had special brass drill bits you can tell by
the elongated flutes and you could drill a brass part without panic setting in waiting for the grab an jam and part spinning
before we got them i used to ware the thick welding gloves other non ferrous metals didn't seem to be as bad as brass
Richard Stamile
Oceanside NY.
Oceanside NY.