04-25-2018, 08:16 PM
(This post was last modified: 04-25-2018, 08:19 PM by ted johnson.)
Brian, throttles are throttles, whatever engine or engines are used. Here is the throttle pull I use on every kart I build here. The rod is threaded 1/4-28, the aluminum cable plate threads onto the rod, and has .078 holes for the steel 1/16" stranded cables, and drill counterbores on the face of the pull plate that faces the front of the kart to seat the little balls on the cable ends. The return springs are easily found. This setup never fails and is easy to make. The holder for the compression fittings is threaded 1/8-27 NPT female pipe thread. Ted