03-14-2018, 07:29 AM
Hi Rick,
Curious to hear what Dave L's source comes back with. In the mean time:
Your original post (above) squares up well with the consensus here and in the thread from last September. You did your homework (12 caster, 7 kpi, good choices).
The only thing I'll add: even if your original spindles are beat up, between the two of them, it should be possible to get a reading on the kpi (even Ray Charles could see the difference between 7deg vs. 0deg ).
In the earlier post, Brian Sheridan was clear on the GK-800 having some amount of kpi, so I'm predicting that you'll find that the article from 55 years ago was off-base.
Funny when you think about it... the guys pushing that magazine article out probably never dreamed that somebody would be debating it 55 years later!
Doug
Curious to hear what Dave L's source comes back with. In the mean time:
Your original post (above) squares up well with the consensus here and in the thread from last September. You did your homework (12 caster, 7 kpi, good choices).
The only thing I'll add: even if your original spindles are beat up, between the two of them, it should be possible to get a reading on the kpi (even Ray Charles could see the difference between 7deg vs. 0deg ).
In the earlier post, Brian Sheridan was clear on the GK-800 having some amount of kpi, so I'm predicting that you'll find that the article from 55 years ago was off-base.
Funny when you think about it... the guys pushing that magazine article out probably never dreamed that somebody would be debating it 55 years later!
Doug