02-17-2018, 09:46 PM
Thanks Steve!
I didn't realize it but there was a flat washer and a split lock washer under the nut. I installed both back on there with the cup and the nut will be close to flush with the tip of the crank.
Torque spec is 420 inch pounds from a recent post on the 820. If someone knows different let me know.
Thanks!
Brad
I didn't realize it but there was a flat washer and a split lock washer under the nut. I installed both back on there with the cup and the nut will be close to flush with the tip of the crank.
Torque spec is 420 inch pounds from a recent post on the 820. If someone knows different let me know.
Thanks!
Brad