02-03-2018, 05:40 PM
I'm working with a machinist down here to help me with some 3rd bearing plates and supports for some of my engines. Shops used to carry these in the '80s and '90s, but they've dried up. The ones I bought used were slotted out and always crooked.
I just got some back for my DAP T50s and have a need for some other engines. The supports are milled for the 6202 type bearing with the DXL 15mm shoulder starter nut. The base plates are drilled for the standard GEM, SDH 2-bolt angle mounts.
If there is any interest in plates for the engines listed below let me know and I might focus on one type. I understand the IAME piston ports are widely unpopular with vintage, but some bolt patterns interchange in the family.
DAP T50 90 x 132mm Maybe the same as some vintage DAP reeds?
TKM BT82 80 X 123mm
Probably available new from Buller.
Parilla TT25/75 80 X 128mm
Sirio TT45 80 X 128mm
![[Image: 40066372961_02ac4d6f21_c.jpg]](https://farm5.staticflickr.com/4629/40066372961_02ac4d6f21_c.jpg)
![[Image: 40066372171_092e88478d_c.jpg]](https://farm5.staticflickr.com/4699/40066372171_092e88478d_c.jpg)
I just got some back for my DAP T50s and have a need for some other engines. The supports are milled for the 6202 type bearing with the DXL 15mm shoulder starter nut. The base plates are drilled for the standard GEM, SDH 2-bolt angle mounts.
If there is any interest in plates for the engines listed below let me know and I might focus on one type. I understand the IAME piston ports are widely unpopular with vintage, but some bolt patterns interchange in the family.
DAP T50 90 x 132mm Maybe the same as some vintage DAP reeds?
TKM BT82 80 X 123mm
Probably available new from Buller.
Parilla TT25/75 80 X 128mm
Sirio TT45 80 X 128mm