10-18-2017, 10:27 PM
nope reeds can cause trouble but excess fuel would be strange. the reeds should lie flat on their flat surface with no air gap.
also should be smooth on edges. not cracked or ragged.
if they are not flat dis assemble and flip them.
excess fuel as doug said is bad seat or diaphram issues with fulcrum.
height or spring.
one easy mistake is accidently reversing gasket order with diaphram , check that first.
if you did the fulcrum arm will be always open from the rivit pressing on it.
also should be smooth on edges. not cracked or ragged.
if they are not flat dis assemble and flip them.
excess fuel as doug said is bad seat or diaphram issues with fulcrum.
height or spring.
one easy mistake is accidently reversing gasket order with diaphram , check that first.
if you did the fulcrum arm will be always open from the rivit pressing on it.
Dave L.