Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
It has to end
#9
Some people have to win at any expense , I know I don't have a chance to win I'm down on horsepower compared to most and spot most of the field 80 to 100 lbs but I'm determined to have fun and do the best I can . I spent several months restoring my Emmick a little hear and there after work making sure everything was as good as could possibly be and as safe as it could be only to be taken out on the first lap of the first heat in the Yamaha piston port class on the short straight after the hair pin , it wiped out the entire right front corner. spindle , tie rod , heim joints , rim and tire , come on fellas on a straightaway , as far as I'm concerned some one owes me at least an apology and the $250.00 in parts wouldn't hurt either !
Reply


Messages In This Thread
It has to end - by steve welte - 06-19-2017, 01:02 PM
RE: It has to end - by ted johnson - 06-19-2017, 03:16 PM
RE: It has to end - by steve welte - 06-19-2017, 04:31 PM
RE: It has to end - by chuck giacobbe - 06-19-2017, 06:03 PM
RE: It has to end - by Duke Zink - 06-19-2017, 09:12 PM
RE: It has to end - by steve welte - 06-19-2017, 09:14 PM
RE: It has to end - by Duke Zink - 06-19-2017, 09:24 PM
RE: It has to end - by jeff brown - 06-20-2017, 04:06 PM
RE: It has to end - by steve welte - 06-19-2017, 09:50 PM
RE: It has to end - by brent hays - 06-19-2017, 09:50 PM
RE: It has to end - by Ludovico Prelogar - 06-19-2017, 10:09 PM
RE: It has to end - by steve welte - 06-19-2017, 10:25 PM
RE: It has to end - by Al Postiglione - 06-20-2017, 09:47 AM
RE: It has to end - by Vern Bergman - 06-20-2017, 10:38 AM
RE: It has to end - by Walter Dale - 06-20-2017, 01:36 PM
RE: It has to end - by Gary Wlodarsky - 06-20-2017, 02:43 PM
RE: It has to end - by Al Postiglione - 06-20-2017, 03:09 PM
RE: It has to end - by steve miller - 06-20-2017, 02:57 PM
RE: It has to end - by Jim Waltz - 06-20-2017, 05:03 PM
RE: It has to end - by Scott Kneisel - 06-20-2017, 06:17 PM
RE: It has to end - by David Luciani - 06-20-2017, 08:12 PM
RE: It has to end - by David Luciani - 06-20-2017, 10:05 PM
RE: It has to end - by Duke Zink - 06-21-2017, 08:46 AM
RE: It has to end - by Jim Waltz - 06-21-2017, 11:52 AM
RE: It has to end - by Jim Waltz - 06-22-2017, 08:01 AM
RE: It has to end - by Duke Zink - 06-23-2017, 08:51 AM
RE: It has to end - by Jim Waltz - 06-23-2017, 09:36 AM
RE: It has to end - by David Luciani - 07-04-2017, 09:31 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)