05-28-2020, 11:46 AM
As Ted knows I run a bunch of benders. Except for the duals I normally run a 9t. The tracks are so tight and we have to run so hard I have to use a 9T. Some of the tracks are also not smooth. To run a 10t and huge lower sprocket will just get you bent sprockets. Now if I wasn't trying to be competitive then i would run a 10 and just run a lower sprocket that will just maybe stay off the surface. Some of the tracks i have to run a 9/69/70. Your not going to run a 10 and the big sprocket and survive. I've even considered grinding every link plate on the drum side of the chain to eliminate the dimpling. the dimples get deep enough and it just like you used chisel to chop the sprocket off. Now where is that 9 1/2 tooth sprocket?