05-04-2020, 04:30 AM
(This post was last modified: 05-04-2020, 05:32 AM by Terry Bentley.)
The steering shaft is 1/2". But enclosed in 3/4" tubing.
I am going with a `60 Hoffco Hurricane definitely. Thats my final answer. (Hits the buzzer)
Specs for a 1960 Hoffo Hurricane are:
steel welded plate pedals upright steel arm tapers at top behind pedal pad
3/8" tierods and heim joints short lower tierod goes to right spindle
rear axle 3/4" housed
4" drum brake-backing plates are integral to axle tube housing
3 stud demountable wheels with magnesium hubs
46" wheelbase
Tread width (f) 31" ® 32" both are rough measurements
Roll bar, front bumper and nerf bars also available.
I am going with a `60 Hoffco Hurricane definitely. Thats my final answer. (Hits the buzzer)
Specs for a 1960 Hoffo Hurricane are:
steel welded plate pedals upright steel arm tapers at top behind pedal pad
3/8" tierods and heim joints short lower tierod goes to right spindle
rear axle 3/4" housed
4" drum brake-backing plates are integral to axle tube housing
3 stud demountable wheels with magnesium hubs
46" wheelbase
Tread width (f) 31" ® 32" both are rough measurements
Roll bar, front bumper and nerf bars also available.