08-08-2018, 04:19 PM
(This post was last modified: 08-11-2018, 04:38 AM by Scott Kneisel.)
Hi all,
Many of you have seen this kart at TBO it's equipped with a fresh Mc5 that is basically stock, 0.020" over size and an Mc45 manifold with Go Power reed and a 134A Tillotson gas carb. It has a Noram clutch with an arena billet 9T drum and 4000RPM springs.
The kart itself has over the tie rod pedals so I could fit in it and a butterfly wheel for extra belly room. Front pan section is aluminum to reduce weight.
This kart is tight for a 6 footer but I can drive it OK as is although it is best for a smaller person or Junior. This is also no barn burner but runs and starts great and is fun to drive. The engine has only an hour or so run time.
Go Power wheels are original, tires are near new and are Cheng Shins.
Seat is top quality and very comfortable.
Scott Kneisel
Many of you have seen this kart at TBO it's equipped with a fresh Mc5 that is basically stock, 0.020" over size and an Mc45 manifold with Go Power reed and a 134A Tillotson gas carb. It has a Noram clutch with an arena billet 9T drum and 4000RPM springs.
The kart itself has over the tie rod pedals so I could fit in it and a butterfly wheel for extra belly room. Front pan section is aluminum to reduce weight.
This kart is tight for a 6 footer but I can drive it OK as is although it is best for a smaller person or Junior. This is also no barn burner but runs and starts great and is fun to drive. The engine has only an hour or so run time.
Go Power wheels are original, tires are near new and are Cheng Shins.
Seat is top quality and very comfortable.
Scott Kneisel