|
Gearing for Avon
|
07-06-2018, 12:10 PM
I'm trying a Dyna Drive myself. There aren't many Dyna Drives with a Rev Grip in an oil housing running on West Bend 610's, but we've designed and machined the housing, output shaft and mount plate, and we'll try her out at the big November Tucson event! Yall come on down. We've built several of the same setup for the Mac '91's as well. Ted
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Gearing for Avon - by Michael Drechnowicz - 07-02-2018, 07:04 PM
RE: Gearing for Avon - by Romero Llamas - 07-02-2018, 08:57 PM
RE: Gearing for Avon - by Kurt Bogerman - 07-02-2018, 10:50 PM
RE: Gearing for Avon - by Brett Mallory - 07-03-2018, 04:29 AM
RE: Gearing for Avon - by John Wolkiewicz - 07-05-2018, 07:31 AM
RE: Gearing for Avon - by David Luciani - 07-05-2018, 08:10 AM
RE: Gearing for Avon - by Kurt Bogerman - 07-05-2018, 09:39 AM
RE: Gearing for Avon - by steve miller - 07-05-2018, 10:20 AM
RE: Gearing for Avon - by Kurt Bogerman - 07-05-2018, 10:56 AM
RE: Gearing for Avon - by Michael Drechnowicz - 07-05-2018, 02:36 PM
RE: Gearing for Avon - by Kurt Bogerman - 07-05-2018, 04:26 PM
RE: Gearing for Avon - by ted johnson - 07-05-2018, 04:31 PM
RE: Gearing for Avon - by Kurt Bogerman - 07-05-2018, 04:39 PM
RE: Gearing for Avon - by ted johnson - 07-05-2018, 05:09 PM
RE: Gearing for Avon - by Kurt Bogerman - 07-05-2018, 07:33 PM
RE: Gearing for Avon - by Bill Peck - 07-06-2018, 11:42 AM
RE: Gearing for Avon - by ted johnson - 07-06-2018, 12:10 PM
RE: Gearing for Avon - by John Wolkiewicz - 07-07-2018, 06:41 AM
RE: Gearing for Avon - by steve miller - 07-07-2018, 06:50 AM
RE: Gearing for Avon - by richard Engel - 07-07-2018, 08:09 AM
RE: Gearing for Avon - by David Luciani - 07-07-2018, 10:00 AM
|
