+- Vintage Karting Forum (https://www.vintagekartforum.com)
+-- Forum: Main forums (https://www.vintagekartforum.com/forumdisplay.php?fid=1)
+--- Forum: For Sale/Wanted (https://www.vintagekartforum.com/forumdisplay.php?fid=3)
+--- Thread: Azusa front wheels (/showthread.php?tid=1323)
Pages:
1
2
RE: Azusa front wheels - Brad Rose - 10-05-2018
Steve’s repop.
RE: Azusa front wheels - ted johnson - 10-05-2018
Nice piece. Steve's a craftsman. TJ
RE: Azusa front wheels - Brad Rose - 10-07-2018
Thanks Ted!
Steve basically sent me a kit. All the tubing was bent but not welded together. After that I built it how I wanted it. I wanted to keep it true to the original karts but with a modern twist.
Brad
RE: Azusa front wheels - ted johnson - 10-07-2018
Brad, you should be proud of it! TJ
RE: Azusa front wheels - Brad Rose - 10-07-2018
I’ll be happy when I get it down the track. Hard to get time to work on it. Hope you have been well Ted!
Brad
RE: Azusa front wheels - ted johnson - 10-07-2018
Reasonably well, Brad. Getting the 610 and the new Cubel/Johnson oil clutch housing ready to bolt up to my Dyna Drive gearbox. I designed it along with Ron, Ron did the machine work and it's going together very nicely. I'll bet there aren't many West Bends on Dynas with oil clutch housings! Pro/E is a wonderful thing. We will give 'er a try at Tucson early November, along with Tom Kelley's new Bender manifold. The Photon's ready to go with the Bill Rowan alky HL368 and his top carb adapter for the V-12,
Ted