(07-27-2017, 06:15 PM)Ludovico Prelogar Wrote: [ -> ]I hate to be a tool hog.. but could I borrow it? I've got a nine tooth drum but no way to get the clutch off. I've got a 60 and 62 sprocket as a pair like Tom Day suggested.
so you currently have a 10 tooth drum on your engine from running at new castle?
i'll have the tool with me and if you need any help ill be there thursday noonish
tom
You are correct. Thank you for helping!!
(07-27-2017, 06:15 PM)Ludovico Prelogar Wrote: [ -> ]I hate to be a tool hog.. but could I borrow it? I've got a nine tooth drum but no way to get the clutch off. I've got a 60 and 62 sprocket as a pair like Tom Day suggested.
You can make one. Pc of or alum with 4 screws, like a flywhl puller.
We'll be there as well Vico, if you need help with it let us know. I'm guessing that Jim Donovan / Max Torque will also be there. I have conversed with him recently about Quincy. I'll probably be running our highly experimental Max Torque Oil Clutch.
Max Torque oil clutch? I like the sound of that!
It'll be good to see you guys again. See you then.
(07-27-2017, 06:15 PM)Ludovico Prelogar Wrote: [ -> ]I hate to be a tool hog.. but could I borrow it? I've got a nine tooth drum but no way to get the clutch off. I've got a 60 and 62 sprocket as a pair like Tom Day suggested.
If you want to just leave the 10 tooth on you can just add 6 teeth to whatever sprocket you would run with a 9. 60 equals 66, 61=67, 62=68.
Thanks, Tom. I like the idea of less heat surrounding the clutch.
Hey guys, Jim Donavan says he'll be at Quincy,that is if he survives his rafting trip down the Colorado river!
Vico, I also have the Max Torque puller and assy tool. But if Jim is there have him do it,he is way faster than most of us.
show certificates are on the way,,I can't make it this year..my son getting, hack, cough ,,stumble...married on the 18th o r was it the 19th...
gw