Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Burnishing pictures
#81
Beautiful as always my friend.  You never cease to amaze me.
Reply
#82
I've been very busy doing jobs for the oldminibike guys. Wheels--by far-- are what I do the most. It's good to get a break and do some kart parts. Here is a quick one from Karl.
[Image: 43436650080_81137f6163_c.jpg]
[Image: 44528049774_330905c98d_c.jpg]
[Image: 43436648450_2434938c68_c.jpg]
[Image: 45250334181_00720b37e5_c.jpg]
[Image: 43436646980_f9cd68ec29_c.jpg]
[Image: 45250332541_f72f5d0e1c_c.jpg]
Reply
#83
I got my hand on a heavily modified K88 and a pretty stock looking K35 today. I've never had a Komet rat motor and was happy to accept the challenge. I've been doing a lot of mini-bike parts and I was happy to get my hands on some K35 parts.
Here are some pics of the rat..
[Image: 31081131317_aa6ffef19f_c.jpg]
[Image: 45970341112_99c06fe7d5_c.jpg]
][Image: 45970322512_c9288411a2_c.jpg]
[Image: 45295907364_7b8c7c308a_c.jpg]
[Image: 45295905654_af07fb2e19_c.jpg]

I've done a half dozen mid-70s Komets and they have a different look compared to other engines. Here is a K78 TT with some nice porting which I can't show.
[Image: 31081129867_d374b64c5e_c.jpg]
[Image: 46019900591_46a866c1d1_c.jpg]
[Image: 45108432325_fa01d7e195_c.jpg]
[Image: 32149203918_ace6ee6153_c.jpg]
[Image: 32149201468_74ae3c1edc_c.jpg]
[Image: 44204408910_e98b4324c4_c.jpg]
Reply
#84
[Image: 32149203508_77e3556342_c.jpg]
[Image: 45108432915_33be666184_c.jpg]

I'm going to be selling my restored sidewinders. I'll post on the site this week.
Reply
#85
I got some more engines from FVK. Not everyone wants the "over-burnished" look and I can limit the time in the tank to accommodate. I cut the time in half and they still look incredible. Here we have a LH/RH K88 pair. The turn around time was under 24 hours. 

[Image: 46159479892_ac7bf1003e_c.jpg]

[Image: 45486129624_041003b865_c.jpg]

[Image: 45297241045_a0b53eeca7_c.jpg]

[Image: 46210085091_d620591db8_c.jpg]

[Image: 45297238565_67d9d78109_c.jpg]

[Image: 46210079561_71a9ca5c00_c.jpg]

[Image: 45297236885_2ec9aa1d1b_c.jpg]
Reply
#86
Here are some PP flywheels for Bobby M. They are mostly RH drive, but a few LH.  Thanks Bobby.

[Image: 45334755715_eb3dd47a2c_c.jpg]
[Image: 46196948222_b8deee6f6a_c.jpg]
[Image: 45334753775_5e3e3120e9_c.jpg]
Reply
#87
Ted sent a 91B1 coupled to a gearbox for some burnishing. I went ahead and replaced the bearings while I was in there.
Here are some GB pics first.
[Image: 45379528835_865a2d287b_c.jpg]
[Image: 46242136182_8db775ca88_c.jpg]

[Image: 46242130332_d3e8390610_c.jpg]
[Image: 45379537335_a358fc1c9e_c.jpg]
[Image: 45379535505_60f60243f0_c.jpg]
[Image: 45379534785_7f917dc428_c.jpg]

Here is the 91B1. From here is goes to some good hands for a hone/fit and assembly. Thanks Ted!

[Image: 45379540975_2b2fef7c2c_c.jpg]
[Image: 46242134132_283bd259c3_c.jpg]
[Image: 46242133622_bbcbfe382e_c.jpg]
[Image: 45379538995_75b0d0cca3_c.jpg]


[Image: 45379530165_3348371535_c.jpg]
[Image: 45379531185_b2a1f0cf0f_c.jpg]
[Image: 45379527615_af442238a5_c.jpg]
[Image: 46292308711_7853806db1_c.jpg]
Reply
#88
Tom B. sent an order of Rupp and Margay parts. They were already blasted, so here are just the finished photos. Thanks Tom!

[Image: 45379801985_1151f8c8ea_c.jpg]
[Image: 44475583150_07d6a22719_c.jpg]
[Image: 44475582610_95e7a81e04_c.jpg]
[Image: 46292548121_d6d1c52bc7_c.jpg]
[Image: 46292547421_f03b9b8300_c.jpg]
Reply
#89
Thanks for cleaning up the spam on this thread. I've been doing so many minibike parts I've hardly had any time to do anything else.
I did want to post this WB580 because it's the first one I've had in my hands. It came with a Pamini Piston.
[Image: 45723798455_d3508299eb_c.jpg]
[Image: 45723799865_41662e4686_c.jpg]
[Image: 45723799125_680bba93c0_c.jpg]

After. It took an hour to burnish and another 20 minutes to remove the pins. It's perfect.
[Image: 32763941018_62ab40b24e_c.jpg]
[Image: 45723769685_373c0ddf48_c.jpg]
[Image: 32763939028_fcd37b7536_c.jpg]
[Image: 45723767075_22358064ec_c.jpg]
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)