WTB TT 75 3rd bearing mout

[Tim Staup]

Looking for 2 different mount assy,, both for 3 rd bearing set ups,, One for a TT 75 and one for a K35

Assembling projects over winter,, Plus looking for a  Burco 10t clutch for each. Could use any guidance gentlemen

its be 30 years since I have done this,, TIA,.,,,Tim

[Paul F]

Just buy a Comet Cart Sales heavy duty Yamaha one and drill and counterbore 4 new holes for your bolt pattern. It will be outside of the Yamaha pattern There is plenty of extra meat on the Heavy duty mount to accommodate the wider and longer pattern. Thant's what I did for my Komets. The mount is 5/8" thick which is thicker than all the others.

[Tim Staup]

Just buy a Comet Cart Sales heavy duty Yamaha one and drill and counterbore 4 new holes for your bolt pattern.  It will be outside of the Yamaha pattern  There is plenty of extra meat on the Heavy duty mount to accommodate the wider and longer pattern.  Thant's what I did for my Komets.  The mount is 5/8" thick which is thicker than all the others.

  Thanks,,Paul  ,, simple answer,, I was over thinking it,,,