Hartman seal # in the Aluminum cover

[Jim Donovan]

Need some help.  The seal in the Hartman clutch is #7413   C/R   EP .  Would like to order some from McMaster-Carr but they cannot find a cross reference to that number.  Has anyone order them recently and have a source or could give me the part number used by McMaster-Carr?

[DEAN KANOCZ]

Jim,

I have had good luck with Applied Industrial Technologies. 

They show 7413 in stock for 6.89 each on website.



Dean

[Kurt Bogerman]

For what it's worth, I have successfully ordered seals and bearings on numerous occasions from Applied.com.  I don't find their current website to be as user friendly as it used be. I've found the new format makes it more difficult to drill down by dimensions and see the seal or bearing specs. They do have a phone number:  (877)279-2799. My experience with their hotline in order to clarify a recent order was excellent.

-Kurt

[David Luciani]

i had no trouble looking up seal with number at www.applied.com so that section is good at least.
 heres the link

https://www.applied.com/search/?search-c...&text=7413

this page may be useful for cross reference purposes jim.
https://www.vsm.skf.com/us/en/products/7413

and never used these sources but they have decent pricing might be worth checking out.

https://intechbearing.com/products/750x1...4-oil-seal

https://www.mrosupply.com/seals/oil-seal...skf-seals/

[Jim Donovan]

Thank you for the company to go to, I will check them out.

[Bob Alexander]

Thank you for the company to go to,  I will check them out.

Jim:

I use https://www.ebatmus.com/ for seals and bearings.  Dave Luciani once recommended it.

Bob Alexander