+- Vintage Karting Forum (https://www.vintagekartforum.com)
+-- Forum: Resource Archive (https://www.vintagekartforum.com/forumdisplay.php?fid=88)
+--- Forum: Restoration Advise Section Basics to Complex (https://www.vintagekartforum.com/forumdisplay.php?fid=90)
+---- Forum: Engine Advise (https://www.vintagekartforum.com/forumdisplay.php?fid=58)
+----- Forum: Mcculloch Engines (https://www.vintagekartforum.com/forumdisplay.php?fid=59)
+----- Thread: Inner shroud (/showthread.php?tid=962)
Inner shroud - Steve carroll - 01-25-2017
are the mcculloch inner shrouds the same for a 49 and a 91 series?
RE: Inner shroud - Brian Santee - 01-26-2017
Yes, a kart and a saw inner are different in that the saw does not have the notches to get at the head bolts. The mc5 inner is also different being the plug enters from the exhaust side. Otherwise as far as I know all the standard series shrouds are the same for the inners.
RE: Inner shroud - Steve carroll - 01-26-2017
Thanks
RE: Inner shroud - steve welte - 01-26-2017
Steve you just take a chain saw file and make the notches for the head bolts. If you need covers E mail me. there are a lot of them close to you.