Meet "Betty" - Printable Version +- Vintage Karting Forum (https://www.vintagekartforum.com) +-- Forum: World Wide Vintage Kart Build Off (https://www.vintagekartforum.com/forumdisplay.php?fid=4) +--- Forum: Member Entries (https://www.vintagekartforum.com/forumdisplay.php?fid=38) +--- Thread: Meet "Betty" (/showthread.php?tid=42) |
Meet "Betty" - Brian Thomas - 08-25-2016 I will post here for the "Betty" build . pictures are As found and ready for powder coat . RE: Meet "Betty" - Brian Thomas - 09-29-2016 Powder coat done . RE: Meet "Betty" - Brian Thomas - 10-14-2016 Some progress on Betty , The tires came in , we decided to use the GoPower wheels over the Dico wheels . The GP wheels weigh 1/3 of the Dico ones . The bearing placement allows me to use spacers and set the front track about 2 inches wider. The 4 inch tires weigh less that the 5 inch counterpart. The work has been real slow because my hands, wrists, shoulders and hips have not been very cooperative . Thanks to Dottie for her help. The red material will be the primary color for the seat . Check out the cool vintage steering wheel we found . We are always fluid on our builds . We have a general plan with lots of pictures of progress and drawings of what we want it to look like . This was going to be powered by an AH51 and use the stock 5 inch Moss drum brake . Well that went out the window in favor of a 6 ported with booster ports , dual carb AH61 and a Bendix brake . |