HC12A carb - Printable Version +- Vintage Karting Forum (https://www.vintagekartforum.com) +-- Forum: Main forums (https://www.vintagekartforum.com/forumdisplay.php?fid=1) +--- Forum: General (https://www.vintagekartforum.com/forumdisplay.php?fid=2) +--- Thread: HC12A carb (/showthread.php?tid=3158) |
HC12A carb - ted johnson - 10-21-2021 I have a Tilly HC12A carb n the shop. It's NOS, and has a 1" throttle bore and the old style fuel inlet built into the top plate with the little steel cover plate instead of the plastic inlet bowl. I don't remember where it came from. I had planned to put it on a Hovey manifold and install it on the Mc5 I'm assembling for Charlie Craibe, since the steel cover makes it look like the original HL63 carb on Mc5's. Anybody got a clue as to where these were used? I assume and hope it is drilled for gas. Thanks. Ted RE: HC12A carb - john phippen - 10-22-2021 Ted Discount Marine lists the 11A and 13A as saw carbs . The 12 A is listed but with no specs other than 1963 and under the column (equipment) it says spec 2120 whatever that means. I would assume its gas. RE: HC12A carb - Terry Sullivan - 10-22-2021 Ted, Need another one? https://www.ebay.com/itm/265262591296 t RE: HC12A carb - ted johnson - 10-22-2021 Terry, I saw that one, but mine has a pump stack and the shiny steel inlet cover. It looks like an HL63A from an Mc5, except for the bore size. I can't remove that steel cap. I guess I will just put a top plate with a plastic fuel inlet on the carb. Ted RE: HC12A carb - Terry Sullivan - 10-23-2021 Mc5%20-%203[1].JPG (Size: 469.17 KB / Downloads: 21) I believe Mr Kneisel built this one RE: HC12A carb - ted johnson - 10-23-2021 Thanks, Terry. That's the way this one should look. I'm just putting a standard inlet plate and fuel bowl on it. I've spent enough time. Ted |