Vintage Karting Forum
WTB Mc 30 piston - Printable Version

+- Vintage Karting Forum (https://www.vintagekartforum.com)
+-- Forum: Main forums (https://www.vintagekartforum.com/forumdisplay.php?fid=1)
+--- Forum: For Sale/Wanted (https://www.vintagekartforum.com/forumdisplay.php?fid=3)
+--- Thread: WTB Mc 30 piston (/showthread.php?tid=2904)



WTB Mc 30 piston - steveohara - 07-25-2020

Anyone have a NOS Mc30 piston at .005 over?
I could also use the 40/45/90 version as well if no 30 is available. The difference is the 30 piston has no ring pins and the gap for the rod is narrower than the later versions. The skirt should measure 2.165" and these are full skirt pistons, not 9 port style.
Steve O'Hara


RE: WTB Mc 30 piston - ted johnson - 07-25-2020

Steve, Terry doesn't have one? Also try Scott Kneisel. If you don't have his contact, I wlll PM you. Ted J.


RE: WTB Mc 30 piston - Scott Kneisel - 07-26-2020

I have some NOS pistons for Mc7-30.
Let me check the sizes.


RE: WTB Mc 30 piston - steveohara - 07-28-2020

Thanks Scott!