+- Vintage Karting Forum (https://www.vintagekartforum.com)
+-- Forum: Main forums (https://www.vintagekartforum.com/forumdisplay.php?fid=1)
+--- Forum: For Sale/Wanted (https://www.vintagekartforum.com/forumdisplay.php?fid=3)
+--- Thread: Need a used Westbend 580 rod (/showthread.php?tid=2866)
Need a used Westbend 580 rod - Terry Bentley - 05-03-2020
Looking for a well used Westbend 580/700 connecting rod. Doesnt have to be pretty or even usable. Worn, rusty and pitted lower journal is fine. I have an idea for swapping it to a different brand bushing motor. Just need to acquire one and adjust it to confirm if actually will work. I would prefer one with little to no value so in case it doesnt work, a good part is not trashed.
For anyone curious, I am installing it in a Clinton A-490. The Westbend rod is slightly longer but... With an offset bushing on top will drop it down enough to fit. Then just scallop the piston to correct port timing. A full floating two piece bushing will also be made for the lower. A big plus is upping the compression a good bit.