WTB Mac Mc10 or D44 saw Fan housing- FOUND ONE - Printable Version +- Vintage Karting Forum (https://www.vintagekartforum.com) +-- Forum: Main forums (https://www.vintagekartforum.com/forumdisplay.php?fid=1) +--- Forum: For Sale/Wanted (https://www.vintagekartforum.com/forumdisplay.php?fid=3) +--- Thread: WTB Mac Mc10 or D44 saw Fan housing- FOUND ONE (/showthread.php?tid=2846) |
WTB Mac Mc10 or D44 saw Fan housing- FOUND ONE - Scott Kneisel - 04-01-2020 This is probably the last piece I need to finish my Mc10 clone. Only came on Mc10 and D44 saw. McCulloch P/n = 51228 Pm or email me if you have one to sell. Damaged is OK, I can probable fix most any damage. Scott I am all set, Cat Kart stepped up on a tip from Stroker Ace. Thank you for all the input, Scott RE: WTB Mac Mc10 or D44 saw Fan housing - Terry Bentley - 04-02-2020 Also the model 55. RE: WTB Mac Mc10 or D44 saw Fan housing - RANDY DUNCALF - 04-02-2020 (04-01-2020, 04:43 PM)Scott Kneisel Wrote: This is probably the last piece I need to finish my Mc10 clone.HELLO SCOTT . Try this . . https://www.ebay.com/itm/FLYWHEEL-SHROUD-SCREEN-FOR-MCCULLOCH-D-44-CHAINSAW/164094401711?hash=item2634c9dcaf:g:QwgAAOSw-rReTfBP RE: WTB Mac Mc10 or D44 saw Fan housing - Terry Bentley - 04-02-2020 That shroud on ebay fits Super 44/55 and newer models. Doesnt come quite close to the D44/55. BUT........... If you like welding this magnesium its not too difficult to cut the top edge down on later model shroud and convert to a D44 style. I have done them in the past, but it is a little time consuming. Patience is required. This area can even be notched out to resemble the earlier shroud. It is an option. RE: WTB Mac Mc10 or D44 saw Fan housing - Alvin A Klusman Jr (Torque) - 04-02-2020 (04-02-2020, 03:26 PM)Terry Bentley Wrote: That shroud fits Super 44/55 and newer models. Doesnt come quite close to the D44/55. Scott is correct! Only on the D44 and Mc-10. The same is true for the cylinder head. RE: WTB Mac Mc10 or D44 saw Fan housing - Terry Bentley - 04-02-2020 These are the two chainsaw models with correct head and shroud. The D44 is a direct drive model using .404 chain. The model 55 powerhead is identical but has a governor with gear reduction transmission and uses 1/2" chain. RE: WTB Mac Mc10 or D44 saw Fan housing - RANDY DUNCALF - 04-03-2020 Got it will keep looking RE: WTB Mac Mc10 or D44 saw Fan housing - Bob Alexander - 04-05-2020 I believe there is one on ebay now, but he saw you coming. RE: WTB Mac Mc10 or D44 saw Fan housing - Scott Kneisel - 04-06-2020 Got one from Tim Hinson at Cat Kart, Thanks for all the input. Scott |