+- Vintage Karting Forum (https://www.vintagekartforum.com)
+-- Forum: Main forums (https://www.vintagekartforum.com/forumdisplay.php?fid=1)
+--- Forum: General (https://www.vintagekartforum.com/forumdisplay.php?fid=2)
+--- Thread: Tilly 348E (/showthread.php?tid=2363)
Tilly 348E - Steve carroll - 09-02-2018
The 348e is a 4cycle alky carb.would it work good on an 820?
RE: Tilly 348E - David Luciani - 09-02-2018
possibly yes but you'll probably need to do control needle swap.
typically 4 strokes use a much finer point on the needles for high and low fuel needles.
i've had horrible experiences experimenting with those needles and decided to not re-invent the wheel.
d
RE: Tilly 348E - ted johnson - 09-02-2018
There are a lot of the large intake HL's out there that were made for four cycles. Most seem to run well. You'll have to fiddle with hi and lo speed needles. TJ
RE: Tilly 348E - steve welte - 09-03-2018
Steve, I have a 348 that I've run a long time and it's been perfect
RE: Tilly 348E - ted johnson - 09-03-2018
I ran two of them back a number of years ago on an open Atlas. It was a rocket. I have one sitting in the room behind me I haven't run yet. TJ