O-ring - Printable Version +- Vintage Karting Forum (https://www.vintagekartforum.com) +-- Forum: Main forums (https://www.vintagekartforum.com/forumdisplay.php?fid=1) +--- Forum: General (https://www.vintagekartforum.com/forumdisplay.php?fid=2) +--- Thread: O-ring (/showthread.php?tid=2199) |
O-ring - Steve carroll - 04-20-2018 Can anyone tell me p/n and where to get the o ring that goes on the inner shroud on macs.measures close to 2-7/16id 1/16 diameter.thanks RE: O-ring - David Luciani - 04-20-2018 any local o-ring supplier will have them. i went to a local place with o-ring in hand he had hundreds of them all sizes you could want. took about 5 minutes for him to match them up. hope this helps d RE: O-ring - Terry Sullivan - 04-21-2018 (04-20-2018, 08:23 PM)David Luciani Wrote: any local o-ring supplier will have them. Something to consider... McCulloch went back to the paper gaskets for the 100 series engines RE: O-ring - steveohara - 04-22-2018 NOS OEM McCulloch O-rings for side plate $15 for four shipped. Message me for Paypal ID Steve O'Hara RE: O-ring - Terry Bentley - 04-23-2018 (04-21-2018, 08:17 AM)Terry Sullivan Wrote:(04-20-2018, 08:23 PM)David Luciani Wrote: any local o-ring supplier will have them. |