+- Vintage Karting Forum (https://www.vintagekartforum.com)
+-- Forum: Main forums (https://www.vintagekartforum.com/forumdisplay.php?fid=1)
+--- Forum: General (https://www.vintagekartforum.com/forumdisplay.php?fid=2)
+--- Thread: Rupp 6 hole sprocket and hub? (/showthread.php?tid=2157)
Rupp 6 hole sprocket and hub? - Brian Smith - 03-28-2018
I'm restoring my '60 Dart Super K, and I'm going back to twin 580 West Bend motors... I would like to replace my sprocket hubs that are pretty beat up with new or way better ones, and get new 72 tooth #35 sprockets. I would preferably like to get the sprockets in split aluminum. I was quoted $45 each for custom aluminum sprockets at Azusa Engineering, but I'm wondering if anyone here has better ideas?
The hubs seem to be impossible to find: 6 holes on 3.250 bolt circle, 1" axle with a 2.125" flange for the brake drum and sprocket hole. Setup for 1/4" keyway and a set screw.
Anyone know where I can get a couple of nice ones?
RE: Rupp 6 hole sprocket and hub? - Gary Wlodarsky - 03-30-2018
Brian
I have two in nice , to very nice condition with the exception of...they have no center section,,the small part that collapses when tightened,,,the hubs them selves are nice...they are the early 3 bolt style,,,send me an email I will send pictures...
gw