Mac coil laminations - Printable Version +- Vintage Karting Forum (https://www.vintagekartforum.com) +-- Forum: Main forums (https://www.vintagekartforum.com/forumdisplay.php?fid=1) +--- Forum: General (https://www.vintagekartforum.com/forumdisplay.php?fid=2) +--- Thread: Mac coil laminations (/showthread.php?tid=2036) |
Mac coil laminations - Bill Peck - 01-18-2018 I have several Mac 91 coils that have laminations so badly rusted that they're unusable. Does anybody know where I can get replacements? RE: Mac coil laminations - Terry Sullivan - 01-19-2018 (01-18-2018, 03:13 PM)Bill Peck Wrote: I have several Mac 91 coils that have laminations so badly rusted that they're unusable. Does anybody know where I can get replacements? I don't have any to spare, but many of the early Mac chainsaw coils/laminations will work. 1-40 series, 1-50, 1-60, 1-70, 1-80, 250, 300, 380, 450, 550 I searched for 'McCulloch coil' on ebay and found a few. I doubt if you will find many bare laminations, so you may have to buy the coil as well. Or, contact some of the sellers and ask if they have a bad/broken coil they haven't listed. RE: Mac coil laminations - Paul Hunter - 01-19-2018 Bill - Chuck ( Strockerace ) probably has some. Paul RE: Mac coil laminations - David Luciani - 01-19-2018 any mcculloch saw coil produced in the same time frame is fine for kart motors. i have about 20 damaged coils with good laminates if you need some. 10 bux each will cover the shipping and hassle to box them up. if you buy more than 3 i'll discount to a lot price. i also have complete coils available maybe around forty or so 18 bux each shipping included untested 25 bux each if you want me to confirm they pitch a spark. p.m. me if interested. RE: Mac coil laminations - Bill Peck - 01-21-2018 (01-19-2018, 02:40 PM)David Luciani Wrote: any mcculloch saw coil produced in the same time frame is fine for kart motors. Dave - That sounds good. I'm not in a hurry for them, I'll figure out how many I need and let you know. I can get them from you at Chestertown ( I assume you'll be attending). Bill. RE: Mac coil laminations - David Luciani - 01-21-2018 not sure yet about chester town. i think it'll be a great track but i may have a calendar conflict. regardless the brown trucks arev a reliable way to get parts if i can't make the race. |