MC-9 head gasket thickness - Printable Version +- Vintage Karting Forum (https://www.vintagekartforum.com) +-- Forum: Main forums (https://www.vintagekartforum.com/forumdisplay.php?fid=1) +--- Forum: General (https://www.vintagekartforum.com/forumdisplay.php?fid=2) +--- Thread: MC-9 head gasket thickness (/showthread.php?tid=1890) |
MC-9 head gasket thickness - Terry Sullivan - 10-29-2017 Finishing a 9 rebuild and I don't have the head gasket thickness Help! RE: MC-9 head gasket thickness - Scott Kneisel - 10-29-2017 (10-29-2017, 06:34 PM)Terry Sullivan Wrote: Finishing a 9 rebuild and I don't have the head gasket thickness Stock gasket was round and right around 0.017" thick Terry. Same as the Mc91 gasket. RE: MC-9 head gasket thickness - Terry Sullivan - 10-29-2017 (10-29-2017, 06:43 PM)Scott Kneisel Wrote:(10-29-2017, 06:34 PM)Terry Sullivan Wrote: Finishing a 9 rebuild and I don't have the head gasket thickness Thanks Scotty! I just happen to have one! This is the first 9 I have built and I already threw the old one away. Stay warm up there. t RE: MC-9 head gasket thickness - Chris Marchand - 10-30-2017 That will look good with A 490 stickers on it , LOL. RE: MC-9 head gasket thickness - ted johnson - 10-30-2017 He was seen down at the Cummings ACE Hardware buying a spray can of Rustoleum red paint.... TJ RE: MC-9 head gasket thickness - Terry Sullivan - 10-30-2017 Chris, You might be surprised what I will put an A490 sticker on! Ted, I do use Rustoleum Safety Red for my Clintons! RE: MC-9 head gasket thickness - ted johnson - 10-30-2017 See? Told ya so! Ted |