BALL-HEX STARTER ADAPTER/REPAIR TIPS - Printable Version +- Vintage Karting Forum (https://www.vintagekartforum.com) +-- Forum: Main forums (https://www.vintagekartforum.com/forumdisplay.php?fid=1) +--- Forum: Vintage Karting Parts Supply Dealers and Stores : new , used and repops (https://www.vintagekartforum.com/forumdisplay.php?fid=12) +--- Thread: BALL-HEX STARTER ADAPTER/REPAIR TIPS (/showthread.php?tid=1211) |
BALL-HEX STARTER ADAPTER/REPAIR TIPS - Jim Waltz - 03-19-2017 Putting this on the new Vintage Karting Forum. These used to be available from TS Racing and others some years ago, but can't be found at present. So, I made up some tooling and can now produce these. As you can see in the photos, it is basically a short cylinder that has a 5/16 hex hole down the middle, with 4 set screw locations, and a Bondhus hex tip cut off to fit. Cylinder will last forever. Replacement Bondhus tips can be bought from many places. I do keep a bit of graphite grease on the tip, as this service is not what Bondhus had in mind for their bits. $35 including postage if you are interested. BTW, this price barely pays me for labor to do the machining - and is pretty much equivalent to what I paid 10+ years ago to buy one. |