Vintage Karting Forum

Full Version: WTB Mc 30 piston
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Anyone have a NOS Mc30 piston at .005 over?
I could also use the 40/45/90 version as well if no 30 is available. The difference is the 30 piston has no ring pins and the gap for the rod is narrower than the later versions. The skirt should measure 2.165" and these are full skirt pistons, not 9 port style.
Steve O'Hara
Steve, Terry doesn't have one? Also try Scott Kneisel. If you don't have his contact, I wlll PM you. Ted J.
I have some NOS pistons for Mc7-30.
Let me check the sizes.
Thanks Scott!