08-10-2018, 08:26 AM
08-10-2018, 04:27 PM
Tom, Some folks in Cali molded foam a few years ago . The last I heard they are no longer in the biz.
Several years ago , I had a seat made and the upholsterer also did the foam . He did high end car upholstery and did the cover and foam beautifully. Good luck , Chris
Several years ago , I had a seat made and the upholsterer also did the foam . He did high end car upholstery and did the cover and foam beautifully. Good luck , Chris
08-11-2018, 11:59 AM
This is probably who Chris M is thinking of (check to be sure!). From the first VKA First Turn I grabbed (Jun/July 2017), back page:
Bill Rowan, R&I Metals, Fox Satellite Seat shells and foam, www.RImetal.com, bill <swirly at symbol>RImetal.com.
Bill Rowan, R&I Metals, Fox Satellite Seat shells and foam, www.RImetal.com, bill <swirly at symbol>RImetal.com.
08-11-2018, 12:08 PM
Anyone who's dealt with Bill Rowan knows the capabilities of his shop. Great guy. Ted
08-13-2018, 11:54 AM
(08-11-2018, 12:08 PM)ted johnson Wrote: [ -> ]Anyone who's dealt with Bill Rowan knows the capabilities of his shop. Great guy. TedRE: the Satellite Seat Foam...
I have talked with Terry Ives...Vince Hughes( who is a personal friend of Bill Rowan.) And talked to Bill.
He has No interest in making the seat foam.He says: Its a Very difficult and costly process. Not worth it.!
08-16-2018, 01:10 PM
I made several from 2” foam slices. A real PITA. I didn’t know you could sand foam. Do it outside! A real relationship buster.