+- Vintage Karting Forum (https://www.vintagekartforum.com)
+-- Forum: Resource Archive (https://www.vintagekartforum.com/forumdisplay.php?fid=88)
+--- Forum: Restoration Advise Section Basics to Complex (https://www.vintagekartforum.com/forumdisplay.php?fid=90)
+---- Forum: Clutch i.d,clutch Archive rebuild info and id section. (https://www.vintagekartforum.com/forumdisplay.php?fid=92)
+---- Thread: Hartman seal # in the Aluminum cover (/showthread.php?tid=2584)
Hartman seal # in the Aluminum cover - Jim Donovan - 05-28-2019
Need some help. The seal in the Hartman clutch is #7413 C/R EP . Would like to order some from McMaster-Carr but they cannot find a cross reference to that number. Has anyone order them recently and have a source or could give me the part number used by McMaster-Carr?
RE: Hartman seal # in the Aluminum cover - DEAN KANOCZ - 05-28-2019
Jim,
I have had good luck with Applied Industrial Technologies.
They show 7413 in stock for 6.89 each on website.
Dean
RE: Hartman seal # in the Aluminum cover - Kurt Bogerman - 05-28-2019
For what it's worth, I have successfully ordered seals and bearings on numerous occasions from Applied.com. I don't find their current website to be as user friendly as it used be. I've found the new format makes it more difficult to drill down by dimensions and see the seal or bearing specs. They do have a phone number: (877)279-2799. My experience with their hotline in order to clarify a recent order was excellent.
-Kurt
RE: Hartman seal # in the Aluminum cover - David Luciani - 05-29-2019
i had no trouble looking up seal with number at www.applied.com so that section is good at least.
heres the link
https://www.applied.com/search/?search-category=all&text=7413
this page may be useful for cross reference purposes jim.
https://www.vsm.skf.com/us/en/products/7413
and never used these sources but they have decent pricing might be worth checking out.
https://intechbearing.com/products/750x1-062x-188-7413-hm14-oil-seal
https://www.mrosupply.com/seals/oil-seals/311142_7413_skf-seals/
RE: Hartman seal # in the Aluminum cover - Jim Donovan - 05-29-2019
Thank you for the company to go to, I will check them out.
RE: Hartman seal # in the Aluminum cover - Bob Alexander - 05-31-2019
(05-29-2019, 11:04 AM)Jim Donovan Wrote: Thank you for the company to go to, I will check them out.
Jim:
I use https://www.ebatmus.com/ for seals and bearings. Dave Luciani once recommended it.
Bob Alexander